Free UK construction calculators Metric and imperial 2026 UK prices

Flooring Calculator

Work out how much flooring to buy for a room. Choose laminate, engineered wood, LVT or carpet, enter the room size and press Calculate to see the packs with the right wastage, or the length of carpet to cut from a 4 m or 5 m roll, plus underlay, scotia or gripper and door bars.

Type Of Flooring

Laying Pattern

Underlay

Size Of The Room

m

Wall to wall, into any alcove.

m

At the widest point.

m²

The m² printed on one pack.

no.

One door bar each.

Measure each room separately and add up the results for open-plan spaces.

How To Use The Flooring Calculator

  1. Choose the flooring: laminate, engineered wood, LVT or vinyl click planks, or carpet.
  2. For hard floors, pick the laying pattern (straight, diagonal or herringbone) and enter the m² on one pack. For carpet, pick a 4 m or 5 m roll.
  3. Say whether you need underlay. Many LVT planks have it built in.
  4. Enter the room length and width and the number of doorways, then press Calculate Flooring.

For hard floors you get the number of packs, the area with wastage and the spare left over; for carpet, the best way to cut it from the roll, the length to buy and any seams. Both show the underlay rolls, the scotia or gripper and the door bars, and a table compares other wastage allowances or roll widths. You can copy the list or save it as a PDF.

How To Measure A Room For Flooring

  • Measure the length and width at floor level, wall to wall, at the widest points, and include alcoves and the space under radiators.
  • Measure into the doorway to the middle of the door when it is closed, where the door bar will sit.
  • For an L-shaped or open-plan room, split it into rectangles, work each one out and add them together.
  • Measure in metres; if your tape is in feet, divide by 3.28.

The area is length × width. A 5 × 3.8 m room is 19 m². Our wall area calculator works the same way for walls if you are decorating too.

How Much Extra Flooring To Order

Every floor loses some boards to cuts at the walls, around door frames and pipes, and to the odd damaged board. The more angled the cuts, the more waste:

Laying patternExtra to orderWhy
Straight10%Cuts at the ends of rows and along one wall
Diagonal (45°)15%Almost every board at the walls is cut at an angle
Herringbone15%Short blocks with angled cuts round the whole edge

UK retailers such as Flooring Hut suggest about 5% for a simple rectangular room and 10% for most installations, rising to 10 to 15% for herringbone. The calculator uses 10% as a safe default and shows the packs at 5, 10, 15 and 20% so you can choose. A spare pack is also handy for repairs later, because the same batch may not be available.

Working Out Packs Of Laminate, Wood Or LVT

Packs = room area × (1 + wastage) ÷ m² per pack, rounded up

Pack sizes vary between products, typically about 1.5 to 2.5 m², so always use the figure on the pack you are buying. Buy all the packs from the same batch, and mix boards from several packs as you lay them so any colour variation is spread across the floor.

  • Laminate is a printed image on a fibreboard core, with click joints. It is hard-wearing and the cheapest option.
  • Engineered wood has a real wood top layer on a stable plywood or softwood base, so it looks and feels like solid wood but moves less.
  • LVT and vinyl click planks are waterproof, which suits kitchens and bathrooms; many have an underlay layer attached.

Floating floors need an expansion gap round the edges, usually about 10 mm, so the boards can move with temperature and humidity. Check the maker's instructions for the exact gap.

How Much Carpet Do I Need?

Carpet comes off the roll in standard widths, usually 4 m or 5 m, and you buy a length. So the question is not the room area but how the room fits the roll:

  • If one side of the room is no wider than the roll, you need one piece the length of the other side, plus about 100 mm to trim at the walls.
  • If both sides are wider than the roll, you need two or more pieces joined with a seam. Seams should run away from doorways and the main walkways, and the pile must run the same way on every piece.

The calculator tries the carpet both ways round and picks the one that buys less. A 5 × 3.8 m room fits a 4 m roll as one 5.1 m length (20.4 m²), but a 5 m roll laid the other way needs only 3.9 m (19.5 m²), with no seams either way. Wider rooms often save carpet, or a seam, on a 5 m roll.

Underlay

Underlay evens out small bumps in the subfloor, reduces noise and adds some warmth. Use the type made for your flooring: thin foam or fibre boards for laminate and wood, rubber or PU foam for carpet. Many rolls cover about 15 m², such as 1.37 × 11 m carpet underlay rolls, so the calculator works in 15 m² rolls; check the roll you buy. On a concrete floor, laminate and wood also need a damp proof membrane, which some underlays include. If your LVT already has underlay attached, do not add another layer unless the maker allows it.

Scotia, Gripper And Door Bars

  • Scotia or beading covers the expansion gap where you do not lift the skirting. It usually comes in 2.4 m lengths.
  • Carpet gripper is nailed round the edge of the room, about 7 mm from the skirting, and holds the stretched carpet. It comes in 1.52 m lengths.
  • Door bars finish the floor in each doorway and join it to the next room's flooring.

The calculator works these out from the perimeter of the room, less about 0.8 m for each doorway.

Worked Example

A 5 × 3.8 m living room with one door: 19 m² of floor and 16.8 m of edge.

FlooringWhat to buy
Laminate, 2 m² packs, straight lay19 × 1.10 = 20.9 m², so 11 packs (22 m²)
Carpet on a 4 m rollOne piece 4 × 5.1 m = 20.4 m²
Carpet on a 5 m rollOne piece 5 × 3.9 m = 19.5 m²
Underlay2 rolls of 15 m²
Scotia or gripper7 × 2.4 m scotia, or 12 × 1.52 m gripper
Door bar1

For the subfloor, our floor screed calculator works out a new screed, and our heat loss calculator helps if you are fitting underfloor heating.

Flooring FAQs

How do I calculate how much flooring I need?

Multiply the room length by the width to get the area in m², add 10% for cutting, and divide by the m² in a pack, rounding up to whole packs.

How much extra laminate flooring should I buy?

About 10% for most rooms, 5% for a simple rectangle, and 15% for diagonal or herringbone layouts.

How much carpet do I need for a room?

Carpet is sold by the length off a 4 m or 5 m roll. If the room is narrower than the roll, buy one length of the other side plus about 100 mm; wider rooms need a seam.

Is it better to buy carpet on a 4 m or 5 m roll?

Whichever fits the room with the least waste and fewest seams. A room up to 5 m wide fits a 5 m roll in one piece.

How much underlay do I need?

The same as the floor area. Rolls often cover about 15 m², so a 19 m² room needs two.

Do I need underlay for LVT?

Not if the planks have underlay built in; adding another layer can damage the joints. Check the maker's instructions.

How many door bars do I need?

One for each doorway where the flooring stops or meets a different floor.

What expansion gap does laminate need?

Usually about 10 mm around the edges of the room, but follow the maker's instructions for your floor.

More Calculators

Wastage guidance from UK flooring retailers including Flooring Hut. Underlay roll and gripper sizes from UK merchant product data. Reviewed November 2026.